Methods to Bypass the DVD Car parking Brake Hookup

How to bypass dvd auto parking brake hookup

Many new car radios and DVD players have a feature that inhibits the player via working when the vehicle is within motion. This kind of feature was designed to ensure the safety of the new driver.

To avoid this, you have to disconnect the head unit from the brake interlock system and ground it. This approach is compatible with most designs and is also useful in old vehicles that are designed with they.

You will also need a cable connection stripper and a pair of needle-nose pliers to take out the wire connections. Follow the guidelines in your head unit’s instruction manual designed for guidance with regards to this.

Up coming, you will need to trim the parking brake line by 1 / 2 and split it to show both ends. Make sure to leave in regards to quarter inch of exposed sections on each end. Then, connect both ends collectively and protect them using electrical recorded argument or an end cap.

One more approach to bypassing the parking brake is always to install a relay switch. This allows one to bypass the wire that sends very bad signals to the pioneer the airwaves when it is connected with parking brakes.

To install the relay switch, you will have to wire the remote transmission wire attaching the amp to the relay’s vitality pin (pin 86). Consequently, run a second ground wire from the open up contact at the coil’s 1 side plus the chassis place. Then, connect the red or green parking brake pedal wire through the head product to pin 30 at the relay move. This connection type will remain a circuit before the boss Auto dvd player is definitely turned on.

Bir cevap yazın

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir